Prof. Dr. Daniel Treyer
Prof. Dr. Daniel Treyer
Activities at FHNW
Lecturer for measurement and control engineering at the FHNW Institute of Automation
Teaching
- Control Systems
- Machine Learning
- Automation laboratory
Research
- Modelling, control, and optimization of dynamic mechatronic systems
- Measurement and sensor technology
Publications
-
No peer reviewed content available
-
[1]D. Treyer, “Modellbasierte Optimierung des Diamantdrahtsägeprozesses für die Fertigung von Siliziumwafern,” Technische Universität Bergakademie Freiberg, Freiberg, 2020. Available: https://irf.fhnw.ch/handle/11654/39512
-
Peer reviewed[2]D. Treyer, S. Gaulocher, S. Niederberger, H. Rafael, G. Frech, and A. Ams, “Diamond wire wafering. A model-based evaluation of different control strategies,” in Proc. 35th European Photovoltaic Solar Energy Conf. and Exhibition EUPVSEC, P. Verlinden, R. Kenny, and P. Helm, Eds., Brüssel: Wip, 2018, pp. 331–336. Available: https://irf.fhnw.ch/handle/11654/39510
-
Peer reviewed[3]D. Treyer, S. Gaulocher, S. Niederberger, H. Rafael, and A. Ams, “A comprehensive dynamic model of the diamond wire sawing process,” in Proc. 33rd European Photovoltaic Solar Energy Conf. and Exhibition EUPVSEC, A. Smets, P. Helm, and N. Taylor, Eds., Amsterdam: WIP, 2017, pp. 517–522. Available: https://irf.fhnw.ch/handle/11654/39509
-
Peer reviewed[4]D. Treyer, S. Gaulocher, S. Niederberger, H. Rafael, and A. Ams, “Application of multi-parametric quadratic programming to simulation of deflected wires in a wire saw,” in Proc. in Applied Mathematics and Mechanics PAMM, C. Könke and C. Trunk, Eds., Weimar: Wiley, 2017, pp. 779–780. doi: 10.1002/pamm.201710357.
-
[5]D. Treyer, T. Moser, and R. Anderegg, “Optimale, digitalisierte mechanische Fertigung,” Hochschule für Technik FHNW, 2017. doi: 10.26041/fhnw-1323.
-
Peer reviewed[6]M. Engeler, D. Treyer, D. Zogg, A. Kunz, and K. Wegener, “Condition-based maintenance. Model vs. statistics a performance comparison,” in 49th CIRP conference on manufacturing systems (CIRP-CMS 2016). Factories of the future in the digital environment, E. Westkämper and T. Bauernhansl, Eds., in Procedia CIRP, no. 57. Stuttgart: Curran, 2016, pp. 253–258. doi: 10.26041/fhnw-6238.
-
Peer reviewed[7]D. Treyer, S. Gaulocher, S. Germann, and M. Siegenthaler, “Silence is golden. Implementation of a noise cancelling office chair,” in INTER-NOISE and NOISE-CON Congress and Conference Proceedings, Institute of Noise Control Engineering, Ed., Hamburg: Institute of Noise Control Engineering, 2016, pp. 6880–6891. Available: https://irf.fhnw.ch/handle/11654/39501
-
[8]D. Treyer, S. Gaulocher, and S. Germann, “Aktive Schallauslöschung für Bürostühle,” Lärmbekämpfung, vol. 11, no. 6, VDI Fachmedien, Düsseldorf, pp. 241–245, 2016. Available: https://irf.fhnw.ch/handle/11654/39506
-
Peer reviewed[9]D. Treyer, S. Gaulocher, S. Germann, and E. Curiger, “Towards the implementation of the noise cancelling office chair. Algorithms and practical aspects,” in From ancient to modern acoustics. 23rd International Congress on Sound and Vibration 2016 (ICSV 23), International Institute of Acoustics and Vibration (IIAV), Ed., New York: Curran Associates, 2016. Available: https://irf.fhnw.ch/handle/11654/39503
-
Peer reviewed[10]D. Treyer and D. Zogg, “Model and Expert Knowledge Based Fault Diagnosis for a Heat Exchanger,” in 2nd IEEE International Conference on Control and Fault-Tolerant Systems (SysTol), Nizza: IEEE, 2013, pp. 680–685. doi: 10.1109/SysTol.2013.6693909.
-
No peer reviewed content available
-
Fertigung 4.0 - optimale, digitalisierte mechanische Fertigung
1.12.2016–1.12.2018, Treyer. DanielEin innovatives, neuartiges Cyber-Physisches System CPS wird im Rahmen des Projektes entwickelt, um den Fertigungsprozess eines Industriedienstleisters zu revolutionieren. Ziel ist es, den Fertigungsprozess digital in einem Modell abzubilden, um die ...
-
Technik-Grosi und Naturkunde-Nonno
1.9.2015–31.8.2019, Till. MariaDie meisten 4- bis 10-jährigen Kinder sind an naturwissenschaftlich-technischen Phänomenen interessiert, sie wollen spielerisch die Welt entdecken. Ihr Forschergeist und ihre Entdeckungslust werden in Familie und Schule aber oft nur ungenügend geförd...
-
No peer reviewed content available
-
Peer reviewed[1]D. Treyer, S. Gaulocher, H. Rafael, G. Frech, and A. Ams, “Model-based optimization of the diamond wire sawing process,” presented at the 4th Freiberg Sawing Symposium, Freiberg, 2019. Available: https://irf.fhnw.ch/handle/11654/39511
-
[2]M. Till, D. Treyer, M. Edelmann, and P. Labudde, “Intergenerational Learning in Science and Technology,” presented at the EAPRIL Conferene 2017, Hämeenlinna, Nov. 30, 2017. Available: http://hdl.handle.net/11654/26388
-
Peer reviewed[3]D. Treyer, S. Gaulocher, S. Niederberger, H. Rafael, and A. Ams, “From single wire process variables to wire web properties - aggregate modeling of the wire sawing process,” presented at the 3rd Freiberg Sawing Symposium, Freiberg, 2017. Available: https://irf.fhnw.ch/handle/11654/39508
-
[4]M. Till, U. Bender, D. Treyer, M. Edelmann, and P. Labudde, “Technik Grosi und Naturkunde Nonno - Intergenerationales Lernen im Bereich Naturwissenschaft und Technik,” presented at the Forschungstag PH FHNW, Basel, Nov. 25, 2016. Available: http://hdl.handle.net/11654/26389
-
[5]M. Till, U. Bender, D. Treyer, M. Edelmann, and P. Labudde, “Activating and implementing experience and knowledge of older generations in science education,” presented at the EAPRIL Conference 2016, Porto, Nov. 22, 2016. Available: http://hdl.handle.net/11654/26387
Contact
-
Prof. Dr. Daniel Treyer
- Lecturer for measurement and control engineering
- Telephone
- +41 56 202 82 49 (direct)
- ZGFuaWVsLnRyZXllckBmaG53LmNo
- FHNW University of Applied Sciences and Arts Northwestern Switzerland
School of Engineering and Environment
Klosterzelgstrasse 2
CH-5210 Windisch